The Calibration Gauge reads the actual pressure or force at the vise jaws that hold the work piece.
We recommend using the Calibration Gauge with the Repeater Vise Handle to verify pressure settings, allowing for minor differences between Repeaters and between vises.
Note the psi reading on your traveler so you can set your Repeater on your next run.
This product can also be used as a force gauge in a vise or other fixture. Has a 1/4-20 threaded hole in the piston for mounting tooling.
Available with 400, 600, 1000, 1500, 2000, 3000 and 5000 psi gauges